Windows

10 Notes
+ Putty - Socks 5 (June 28, 2021, 3:58 p.m.)

1- From the left panel click "Session". Enter the hostname and the Port. In the section "Load, save or delete ....", select the "Default Settings" and click on "Save". 2- From the left panel click "SSH" and then "Tunnels". - In the "Source port" box enter "1080" - Select "Dynamic" - Click the "Add button" 3- To save these settings, return back to "Session" from the left panel again, then select the "Default Settings" and click on the "Save" button.

+ Driver Pack Solution (Aug. 9, 2020, 10:20 a.m.)

https://drp.su/en

+ How to Get Detailed Information About Your PC (Aug. 9, 2020, 8:30 a.m.)

1- Hit Windows+R 2- Type "msinfo32" ------------------------------------------------------------- Use the Command Prompt When You Can’t Boot Into Windows Normally: systeminfo ------------------------------------------------------------- Use the Direct X Diagnostic (DXDIAG) tool: 1- Hit Windows+R 2- Type "dxdiag" -------------------------------------------------------------

+ Adding a new user (July 7, 2020, 2:08 p.m.)

First, log in to Safe Mode: - Click the Windows-button → Power. - Hold down the shift key and click Restart. - Click the option Troubleshoot and then Advanced options. - Go to “Advanced options” and click Start-up Settings. - Under “Start-up Settings” click Restart. - Various boot options are displayed. ... - Windows 10 starts in Safe Mode. Then open the CMD, For creating a user account: net user mohsen moh123 /add For add the user to a particular group: net localgroup administrators mohsen /add

+ Convert MBR disk to GPT disk (April 3, 2020, 11:13 a.m.)

Boot the PC from the DVD or USB. In Windows Setup, press "Shift + F10" to start Command Prompt. 1- diskpart 2- list disk 3- select disk 0 (choose the disk you want to install Windows on) 4- The following command removes all partition and data frm the disk. (Maybe you'd better skip this step): clean 5- convert gpt 6- exit

+ SCP using Putty (Jan. 1, 2018, 5 p.m.)

Download & install Putty from the link below: https://www.chiark.greenend.org.uk/~sgtatham/putty/latest.html After installation open the command line and use the command "pscp" just like normal "scp" in Linux. pscp <src_file> <destination> pscp -P 3031 <src_file> <destination>

+ Installing Windows 7even from Flash Memory (Aug. 20, 2015, 9:14 p.m.)

http://www.intowindows.com/how-to-install-windows-7vista-from-usb-drive-detailed-100-working-guide/ Follow the below steps to create bootable Windows 7/Vista USB drive using which you can install Windows 7/Vista easily. 1. Plug-in your USB flash drive to USB port and move all the contents from USB drive to a safe location on your system. 2. Open Command Prompt with admin rights. Use any of the below methods to open Command Prompt with admin rights. *Type cmd in Start menu search box and hit Ctrl+ Shift+ Enter. Or *Go to Start menu > All programs > Accessories, right click on Command Prompt and select Run as administrator. 3. You need to know about the USB drive a little bit. Type in the following commands in the command prompt: First type DISKPART and hit enter to see the below message. Bootable USB Drive Next type LIST DISK command and note down the Disk number (ex: Disk 1) of your USB flash drive. In the below screenshot my Flash Drive Disk no is Disk 1. 4. Next type all the below commands one by one. Here I assume that your disk drive no is 'Disk 1'.If you have Disk 2 as your USB flash drive then use Disk 2.Refer the above step to confirm it. So below are the commands you need to type and execute one by one: SELECT DISK 1 CLEAN CREATE PARTITION PRIMARY SELECT PARTITION 1 ACTIVE FORMAT FS=NTFS (Format process may take few seconds) ASSIGN EXIT Don't close the command prompt as we need to execute one more command at the next step. Just minimize it. Bootable USB Drive 5. Next insert your Windows7/Vista DVD into the optical drive and check the drive letter of the DVD drive. In this guide I will assume that your DVD drive letter is 'D' and USB drive letter is 'H' (open my computer to know about it). 6. Maximize the minimized Command Prompt in the 4th step.Type the following command now: D: CD BOOT and hit enter.Where 'D' is your DVD drive letter. CD BOOT and hit enter to see the below message. 7. Type another command given below to update the USB drive with BOOTMGR compatible code. BOOTSECT.EXE /NT60 H: 14 Where 'H' is your USB drive letter. Once you enter the above command you will see the below message. 8. Copy your Windows 7/Vista DVD contents to the USB flash drive. 9. Your USB drive is ready to boot and install Windows 7/Vista. Only thing you need to change the boot priority at the BIOS to USB from the HDD or CD ROM drive. I won't explain it as it's just the matter the changing the boot priority or enabling the USB boot option in the BIOS. Note: If you are not able to boot after following this guide means you haven't set the BIOS priority to USB. If you got any problem in following this guide feel free to ask questions by leaving comment.

+ Change File System From FAT32 to NTFS (July 30, 2015, 9:15 p.m.)

Open command prompt and enter the following command: convert G: /FS:NTFS

+ Connect PC to Phone's Internet via cable (March 19, 2015, 7:28 p.m.)

The driver website: http://www.usb-drivers.org/htc-mtp-device-driver-win-7.html -------------------------------------------------------------------------------------------------- 1-Download the driver http://www.usb-drivers.org/wp-content/uploads/2013/12/HTC_drivers_Win7_x64.zip 2-Unzip it 3-From `Tethering and Portable hotspot` menu from cellphone, from `USB tethering setting` choose `Windows` 4-From `Tethering and Portable hotspot` enable the menu `USB Tethering` 5-Connect the cellphone to the PC via cable 6-The Driver Manager will pop up and will try to install the driver, you can provide the path to the unzipped driver folder and it will install it automatically. 7-Now the Internet should be connected automatically. ---------------------------------------------------------------------------------------------------------------------------------- Some specifications about the correct driver: 1-In `Device Manager`, the driver should be placed under `Network Adapters`, named `HTC Remote DNS based Device` 2-In `Network Connections` the connection name is `Local Area Connection 2` 3-In `Devices and Printers` there should be a device named `Android Phone`

+ Connect android to PC's Internet (March 19, 2015, 7:18 p.m.)

http://www.howtogeek.com/117118/how-to-connect-your-android-to-your-pcs-internet-connection-over-usb/